Joel Orr's World

What is RepRap?

RepRap is short for Replicating Rapid-prototyper. It is the practical self-copying 3D printer shown on the right.

The RepRap project became widely known after a large press coverage in March 2005, though the idea goes back to a paper on the web written by Adrian Bowyer on 2 February 2004.

RepRap will make plastic, ceramic, or metal parts, and is itself made from plastic parts, so it will be able to make copies of itself. It is a three-axis robot that moves several material extruders. These extruders produce fine filaments of their working material with a paste-like consistency. If RepRap were making a plastic cone, it would use its plastic extruder to lay down a quickly-hardening 0.5mm filament of molten plastic, drawing a filled-in disc. It would then raise the plastic extrusion head and draw the next layer (a smaller filled disc) on top of the first, repeating the process until it completed the cone. To make an inverted cone it would also lay down a support material under the overhanging parts. The support would be removed when the cone was complete. Conductors can be intermixed with the plastic to form electronic circuits - in 3D even!

more